Package Contents - Wayne-Dalton 8000 SERIES Installation Instructions And Owner's Manual

Package Contents

NOTE: DEPENDING ON ThE DOOR MODEL, SOME PARTS LISTED WILL NOT BE SuPPLIED If NOT NECESSARy.
(2) hORIzONTAL TRACk WITh ATTAChED hORIzONTAL ANGLE Rh/Lh
(1) TORquEMASTER
DOOR SECTIONS (AS REquIRED)
jAMB BRACkETS LuBRCIATING OIL
(AS REquIRED) (AS REquRED)
RIGhT & LEfT (1) LOOSE WINDING ShAfT
DRuM WRAPS (SINGLE SPRING ONLy)
8000 Series, Model 46
TorqueMaster ® - Single and Double Spring
Installation Instructions and Owner's Manual
Portland Source Plant
IMPORTANT NOTICE!
Read these instructions carefully before
attempting installation. If in question about
any of the procedures, do not perform the
work. Instead, have a qualified door agency
do the installation or repairs.
Part No. 323295
© Copyright 2005 Wayne-Dalton Corp. New 11/08/2005
(2) TOP BRACkET
MANuAL
RIGhT & LEfT (2) TOP BRACkET
END BRACkETS
(1) STEP PLATE #1, #2, #3 & #4
OuTSIDE hINGES (AS REquRED)
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
REAR SuPPORTS MAy OR MAy NOT BE INCLuDED WITh yOuR DOOR.
SPRING TuBE
®
RIGhT AND LEfT
BOTTOM BRACkETS
RIGhT AND LEfT CABLE
DRuM ASSEMBLIES
ROLLERS
BASES (AS REquIRED)
u-BAR
SLIDES (AS REquIRED)
COuNTER GEAR(S)
(AS REquIRED)
(2) fuLLy ADjuSTABLE
Rh/Lh fLAGANGLES
DRIVE GEARS
(AS REquIRED)
COuNTER COVER(S)
(AS REquIRED)
IDRIVE
(1) CENTER BRACkET
(SOLD SEPARATELy)
ASSEMBLy
WEAThER SEAL &
(2) LIfT hANDLES
NAILS (If INCLuDED)
& SPACERS
#6 SCREW EyE AND PuLL
ROPE (If INCLuDED)
(2) VERTICAL
Rh/Lh TRACk
OPERATOR
®
(1) STEP PLATE
INSIDE
3