Wayne-Dalton 8000 SERIES Installation Instructions And Owner's Manual page 16

8
NOTE: for door section identification see
Tools Needed:
page 4.
Power Drill
INSTAllATION ON ThE TOP SECTION:
7/16" Socket
Driver
Doors 14'0" wide and over, locate u-Bar
above top bracket and secure with
(2) 1/4"-20 x 7/8" self drilling screws at
each end and center stile location.
NOTE: 3" u-Bars are now supplied with
all glazed doors starting at 14'0" width.
INSTAllATION ON All OThER
SECTIONS:
NOTE: All u-Bars are placed at the top
of the section, against the bottom of the
hinges, for the intermediate, lock and
bottom sections.
NOTE: for doors 16'1" to 18'0" that
have a glazed intermediate section, the
u-bar needs to be placed on the glazed
intermediate section.
NOTE: All WayneMark™ 8200 doors
14'0" to 16'0" wide, 6'0" to 7'0" high (4
section high only) are now supplied with a
2" u-Bar for the top of the bottom section.
Place the u-Bar on the section against the
bottom of the hinges. Center the u-Bar
side to side on the section at the location
shown, and secure to the section using
(2) 1/4"-20 x 7/8" self drilling screws at
each end and center stile location.
Door width
8'-0" to 14'-11"
15'-0" to 16'-0"
16'-1" to 18'-0"
8000 Series U-bar Schedule
Door width
8'-0" to 13'-11"
14'-0" to 14'-11"
15'-0" to 16'-0"
16'-0" to 18'-0"
16
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
U-bar
Model 46 U-bar Schedule
4 Section 5 Section
N/A N/A
(1) 2" u-Bar (1) 2" u-Bar
(3) 2" u-Bar (3) 2" u-Bar
4 Section 5 Section
N/A N/A
(1) 2" u-Bar (1) 2" u-Bar
(1) 2" u-Bar (1) 2" u-Bar
(3) 2" u-Bar (3) 2" u-Bar
u-BAR PLACEMENT fOR TOP SECTION
u-BAR
(2) 1/4"- 20 x 7/8"
SELf DRILLING
SCREWS
TOP
SECTION
SIDE PROfILE
hINGE
DOOR
SECTION
u-BAR
u-BAR PLACEMENT fOR BOTTOM, LOCk AND INTERMEDIATE SECTIONS
hINGE
BOTTOM SECTION
u-BAR
(2) 1/4"- 20 x 7/8"
SELf DRILLING
SCREWS
ATTAChING END STILE
u-BAR
TOP
SECTION
u-BAR PLACEMENT fOR TOP SECTION
TOP SECTION
u-BAR
TOP
BRACkET
ASSEMBLy
hINGE
u-BAR
BOTTOM
(2) 1/4"- 20 x 7/8"
SECTION
SELf DRILLING
SCREWS
ATTAChING CENTER STILE