Wayne-Dalton 8000 SERIES Installation Instructions And Owner's Manual page 13

4
Drums
LEfT hAND
TORquEMASTER
®
COuNTERBALANCE DRuM
IMPORTANT: RIGhT AND LEfT hAND IS
Tools Needed:
ALWAyS DETERMINED fROM INSIDE ThE
None
GARAGE LOOkING OuT.
NOTE: for door section identification see
page 4.
TorqueMaster counterbalance drums
®
are marked right and left hand.
uncoil the counterbalance cables and
make sure you place the right hand BOTTOM SECTION
cable loop on the right hand milford pin
and place the left hand cable loop on the
left hand milford pin.
Insert a roller into bottom bracket of the
bottom section.
MILfORD PIN
Repeat for other side.
NOTE: Verify astragal (bottom seal)
is aligned with door section. If there
is more than 1/2" excess astragal on
either side, trim astragal even with door
section.
COuNTERBALANCE
CABLE
BOTTOM
BRACkET
MILfORD PIN
ROLLER
hINGE TuBE
BOTTOM SECTION
ASTRAGAL
13
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com