Processors; Installing A Second Processor - Fujitsu PRIMERGY Econel 200 S2 Options Manual

5

Processors

V
CAUTION!
Refer to the safety notes in
V
CAUTION!
Processors are components which are extremely sensitive to electro-
static discharges and must be handled with caution. After taking a
processor out of its protective wrapper, set it on an insulated antistatic
surface with the smooth side down. Never slide a processor over a
surface.
5.1

Installing a second processor

The system board can be upgraded with a second processor. The upgrade kit
includes a processor and a heat sink.
V
CAUTION!
You may only use processors of the same type on the system board. The
second processor must have the same type and clock rate as the first.
Use a suitable multiprocessor operating system if dual operation is
required.
Ê Remove the side cover as described in
page 17.
Ê Remove the processor fan 2 as described in
processor fan 2" on page
Ê Remove the system fan as described in
on page 19.
Ê Remove the traverse with the memory air duct as described in
"Removing the memory air duct" on page
Econel200 S2
chapter "Safety notes" on page 11
section "Opening the server" on
18.
section "Removing the system fan"
21.
Options Guide
section "Removing the
et seq. .
section
25