Chapter 3
Installing the Cisco XR 12410 Router
Step 2
Reinstalling Cards in the Chassis
Reinstalling Cards in the Switch Fabric and Alarm Card Cage
Step 1
OL-13832-01
Go to the
"Reinstalling Cards in the Switch Fabric and Alarm Card Cage" section
on page 3-31
to reinstall SFCS cards.
This section describes how to reinstall various line cards back into the chassis.
Use the following procedure to reinstall cards into the switch fabric and alarm
card cage (refer to
Figure 3-7
Loosen the two captive screws on each side of the air filter door and swing the
door away from the switch fabric and alarm card cage
Figure 3-23
Opening the Air Filter Door
Reinstalling Cards in the Chassis
for slot numbering).
Cisco XR 12410 Router Installation Guide
(Figure
3-7).
3-31