Reinstalling Cards In The Chassis; Reinstalling Cards In The Switch Fabric And Alarm Card Cage - Cisco XR 12410 Installation Manual

Chapter 3 Installing the Cisco XR 12410 Router
Step 2

Reinstalling Cards in the Chassis

Reinstalling Cards in the Switch Fabric and Alarm Card Cage

Step 1
OL-17441-01
Go to the "Reinstalling Cards in the Switch Fabric and Alarm Card Cage" section
on page 3-31 to reinstall SFCS cards.
This section describes how to reinstall various line cards back into the chassis.
Use the following procedure to reinstall cards into the switch fabric and alarm
card cage (refer to Figure 3-7
Loosen the two captive screws on each side of the air filter door and swing the
door away from the switch fabric and alarm card cage
Figure 3-23 Opening the Air Filter Door
Cisco XR 12410 and Cisco XR 12810 Router Installation Guide

Reinstalling Cards in the Chassis

for slot numbering).
(Figure 3-7).
3-31