Cisco XR 12410 Installation Manual page 101

Chapter 3 Installing the Cisco XR 12410 Router
Figure 3-18
Position the chassis until the rack-mounting flanges are flush against the
Step 2
mounting rails on the rack (or the optional center-mount brackets, if installed).
Hold the chassis in position against the mounting rails while the second person
Step 3
finger-tightens a screw to the rack rails on each side of the chassis.
Finger-tighten 4 more screws to the rack rails on each side of the chassis.
Step 4
•
Tighten all 5 screws on each side to secure the chassis to the equipment rack.
Step 5
OL-13832-01
Incorrect Lifting Handholds
Space the screws evenly between the top and bottom of the chassis.
Rack-Mounting the Router Chassis
Cisco XR 12410 Router Installation Guide
3-25