Cisco XR 12410 Installation Manual page 97

Chapter 3 Installing the Cisco XR 12410 Router
Identify the orientation of the left and right center-mount brackets
Step 2
Figure 3-14
Threaded holes
Install the right center-mount bracket
Step 3
a.
b.
c.
d.
Repeat Step 3 for the left center-mount bracket.
Step 4
Use a level to verify that the tops of the two brackets are level, or use a measuring
Step 5
tape to verify that both brackets are the same distance from the top of the rack
rails.
OL-13832-01
Center-Mount Brackets
to chassis
Left bracket
Align the bottom screw hole of the bracket with the marked screw hole at the
bottom of the rack and finger tighten a screw in that hole.
Finger-tighten a second screw in the top hole of the bracket.
Finger- tighten three more screws in the middle of in the bracket.
Use a screwdriver to tighten all five screws securely.
Open holes
to rack
Right bracket
(Figure 3-15).
Cisco XR 12410 Router Installation Guide
Rack-Mounting the Router Chassis
(Figure 3-14).
3-21