Table of Contents
Advertisement
Setting up and using the home screen applications
3
Configure the output options and scan settings.
Notes:
•
When scanning a card, make sure that the scan resolution does not exceed 200 dpi for color and
400 dpi for black and white.
•
When scanning multiple cards, make sure that the scan resolution does not exceed 150 dpi for color
and 300 dpi for black and white.
•
You need a printer hard disk to scan multiple cards.
•
Make sure that the printer network and e‑mail settings are configured.
4
Apply the changes.
Using Shortcut Center
1
From the home screen, touch Shortcut Center, and then select a printer function.
2
Touch Create Shortcut, and then configure the settings.
3
Touch Save, and then type a unique shortcut name.
4
Apply the changes.
Setting up Scan Center
1
From the home screen, touch Scan Center.
2
Select and create a destination, and then configure the settings.
Notes:
•
When creating a network destination, make sure to validate and adjust the settings until no errors
occur.
•
Only destinations created from the Embedded Web Server are saved. For more information, see the
documentation that came with the solution.
3
Apply the changes.
Using Customer Support
1
From the home screen, touch Customer Support.
2
Print or e‑mail the information.
Note: For information on configuring the application settings, see the Customer Support Administrator's
Guide.
Setting up Device Quotas
You may need administrative rights to access the application.
1
Open a Web browser, and then type the printer IP address in the address field.
19
Advertisement
Table of Contents
