Large Jobs Do Not Collate; Unexpected Page Breaks; Solving Copy Problems; Copier Does Not Respond - Lexmark X790 Series User Manual

U P
SE THE SAME APER
•
Print a menu settings page and compare the settings for each tray.
•
If necessary, adjust the settings from the Paper Size/Type menu.
Note: The standard 550-sheet tray and the multipurpose feeder do not automatically sense the paper size. You
must set the size from the Paper Size/Type menu.

Large jobs do not collate

These are possible solutions. Try one or more of the following:
M C
AKE SURE OLLATE IS SET TO
From the Finishing menu or Print Properties, set Collate to On.
Note: Setting Collate to Off in the software overrides the setting in the Finishing menu.
R
EDUCE THE COMPLEXITY OF THE PRINT JOB
Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity
of images, and the number of pages in the job.
M
AKE SURE THE PRINTER HAS ENOUGH MEMORY
Add printer memory or an optional hard disk.

Unexpected page breaks

I P
NCREASE THE RINT
1
From the home screen, navigate to:
> Settings > General Settings > Timeouts > Print Timeout
2
Increase the Print Timeout value, and then touch

Solving copy problems

Copier does not respond

These are possible solutions. Try one or more of the following:
C
HECK THE DISPLAY FOR ERROR MESSAGES
Clear any error messages.
S P T
IZE AND APER
O
N
T
IMEOUT VALUE
Troubleshooting
YPE SETTINGS
.
273