Understanding the printer menus
Custom Bin Names menu
Menu Item
Standard Bin
Bin [x]
Custom Scan Sizes menu
Menu item
Custom Scan Size [x]
Scan Size Name
Width
1–8.5 inches (25–215.9 mm)
Height
1–25 inches (25–635 mm)
Orientation
Portrait
Landscape
2 scans per side
Off
On
Universal Setup menu
Use
Units of Measure
Inches
Millimeters
Portrait Width
3–48 inches
76–1219 mm
Portrait Height
3–48 inches
76–1219 mm
Notes:
•
If the width or height exceeds the maximum, then the printer uses the maximum width or height allowed.
•
The width or height can be increased in 0.01-inch or in 1-mm increments.
Description
Specifies a custom name for the Standard Bin
Specifies a custom name for Bin [x]
Description
Specifies a custom scan size name, scan sizes and options. The custom scan size
name replaces Custom Scan Size [x] in the printer menus.
Notes:
•
8.5 inches is the US factory default setting for Width. 210 millimeters is
the international factory default setting for Width.
•
14 inches is the US factory default setting for Height. 297 millimeters is
the international factory default setting for Height.
•
Portrait is the factory default setting for Orientation.
•
Off is the factory default setting for 2 scans per side.
To
Specify the unit of measure.
Note: Inches is the U.S. factory default setting. Millimeters is the
international factory default setting.
Set the portrait width.
Note: 8.5 inches is the U.S. factory default setting. 215.9 mm is the
international factory default setting.
Set the portrait height.
Note: 14 inches is the U.S. factory default setting. 355.6 mm is the
international factory default setting.
140