Counter Reset After Replacing The Fuser Unit, Laser Unit And Paper Feed Kit (Function Code 88); Cancellation Of The Memory Security Mode (Not Applicable To With Out The Ncu Models And The Japanese Model.) - Brother DPC-8060 Service Manual

8.4.18 Counter Reset After Replacing the Fuser Unit, Laser Unit and Paper Feed Kit
(Function code 88)
Function
The number of replacement is increased by one, and the warning indication "Replace ***"
is cleared, with implementing this operation after replacing the fuser unit, laser unit and
paper feed Kit (MP, T1, T2).
Operating Procedure
(1) Press the [8] and [8] keys in this order in the initial stage of the maintenance mode.
(2) The LCD shows the "Parts Replacement".
(3) Press the [▼] or [▲] key to select the item you want to reset. The LCD shows.
"Reset Fuser ?"
"Reset Laser ?"
"Reset PF KIT MP ?"
"Reset PF KIT T1 ?"
"Reset PF KIT T2 ?"
(4) Press the [OK] or [Start] key to reset the counter of the selected part. The machine
returns to the initial stage of the maintenance mode.
(5) When pressing the [Stop] key after Step (2), the machine returns to the standby status of
the maintenance mode. At this time, the drum counter and page counter are not reset.
8.4.19 Cancellation of the Memory Security Mode
(Not applicable to DCP-8060/8065DN and the Japanese model.)
Function
This procedure can cancel the memory security mode. Use this procedure if the user forgets
his/her password entered when setting the memory security mode so as not to exit from the
memory security mode.
NOTE: Carrying out this procedure will lose passwords previously entered but retain FAX
messages received in the memory security mode.
Operating Procedure
(1) When the SECURE MODE is displayed on the LCD, press the [Menu] key and [#] key
together. Within two seconds, start to press the [2], [7], [9], [0] and [0] keys.
The memory security mode will be canceled and the machine returns to the calendar
clock screen.
8-27 Confidential