Brother DPC-8060 Service Manual page 217

(3) Slide the Regist actuator rear to the direction of the arrow 3b while pressing the Hook to the
direction of the arrow 3a and pull up the Regist actuator rear to remove. Then, remove the
Regist actuator spring from the Regist actuator rear.
Regist actuator spring
Assembling Notes
When assembling the Regist actuator spring, ensure that its direction is correct
referring to the figure below.
Hook
Regist actuator rear
Regist actuator rear
3d
3c
3b
3a
Hook
Fig. 5-185
Fig. 5-186
5-118
Paper feed unit
Regist actuator spring
Hook
Confidential