Brother DPC-8060 Service Manual page 372

®
For Macintosh
®
For Mac OS 9.1 to 9.2
(1) From the Apple menu, open the Chooser.
(2) Click the Brother Laser (IP) icon, and make sure that your print server name appears
in the right frame. If it is visible, then the connection is good. Otherwise, go to Step 5.
®
For Mac OS X 10.2.4 or greater
(1) From the Apple menu, select Applications.
(2) Open the Utilities folder.
(3) Double-click the Printer Setup Utility icon.
(4) Click Add.
(For Mac OS
(For Mac OS
(5) (For Mac OS
Make the following selection.
(6) Make sure that your print server appears. If it is visible, then the connection is good.
Otherwise, go to Step 5.
5. If you have tried 1 to 4 above and it does not work, then reset the print server back to the
default factory settings and try from the initial setup again. For information how to reset to
the default factory settings, see Restoring the network settings to factory default on page 7-
7.
®
6. (For Windows ) Firewall setting on your PC may be rejecting the necessary network
connection. Follow the instructions below to disable the Firewall. If you are using a
personal Firewall software, see the User's Guide for your software or contact the software
manufacturer.
Windows XP SP2 users
(1) Click the Start button, Settings, and then Control Panel.
(2) Double click Windows Firewall.
(3) Click the General tab. Verify that Off (not recommended) is selected.
(4) Click OK.
®
X 10.2.4 to 10.3) Go to (5).
®
X 10.4) Go to (6).
®
X 10.2.4 to 10.3)
Fig. 9-10
9-50 Confidential