Brother DPC-8060 Service Manual page 310

LCD
DF
DR
ADF document separation
DL
ADF document SB sensor
DS
FC
Document scanner home
FH
CV
(2) Change the detecting conditions to check that the indication on the LCD changes
according to the sensor states. For instance, insert paper through the document front (or
rear) sensor or the registration sensor (s), open the front cover or the document cover,
remove the toner cartridge, jam paper at the paper outlet, insert paper from the manual
feeder, and load a recording paper tray, etc.
(3) Press the [Stop/Exit] key. The machine beeps for one second and returns to the initial
stage of the maintenance mode.
NOTE: If you have opened and closed the front cover during the above procedure, you need
to open and close the front cover again upon completion of the procedure.
Sensors
Document front sensor
Document rear sensor
sensor/Size sensor
FB cover sensor
position sensor
Front cover sensor
8-17
Sensing status
No document detected.
No document detected.
Document detected.
No document detected.
Document cover closed.
CCD unit home position detected.
Front cover detective
Confidential