Outer Chute Assy - Brother DPC-8060 Service Manual

5.1.7 Outer Chute ASSY

(1) Hold the Knobs on the Outer chute ASSY and pull down the Outer chute ASSY to your side.
(2) Remove the Arms of the Outer chute ASSY from the Pins on the machine body.
(3) Remove the Outer chute ASSY.
Pin
(4) Remove the bind B M3x8 Taptite screw.
(5) Lift up the side where the eject actuator is assembled of the Sub outer chute slightly (to the
direction of the arrow 5a), and move the Sub outer chute to the direction of the arrow 5b.
(6) Lift up the Sub outer chute to remove.
Taptite, bind B M3x8
1
3
1
Fig. 5-12
Sub outer chute
5a
Pin
Fig. 5-13
Pin
2
Knob
Outer chute ASSY
Knob
6
5b
Outer chute ASSY
5-28
<Back side>
Arm
1
Hooks
Confidential