Brother DPC-8060 Service Manual page 329

Error Code
(Hex)
84 Recording paper jam.
(The registration sensor stays
ON after completion of paper
ejection operation.)
85 No paper tray1 loaded.
86 No paper tray2 loaded.
87 Not used.
88 Recording paper jam. (Even
after paper pulling-in
operation, the registration
sensor is still OFF.)
89 Not used.
8A Jam tray1
8B Jam tray2
8C Jam MP tray
8D-A0 Not used.
A1 Front cover opened.
Symptom
9-7
Probable Cause
The paper ejection
roller does not rotate
correctly
Foreign materials in the
paper path.
Registration sensor
actuator caught on the
surrounding parts
Registration sensor
broken
Main PCB defective
Tray 1 is not closed
completely.
Tray 2 is not closed
completely.
Recording paper not
loaded correctly
Registration sensor
broken
Separation pad
damaged
Objects, such as bits of
paper or chips, are in
the paper tray or paper
tray
Paper pick up roller
defective
Paper feed motor
broken
Main PCB defective
Paper jams in tray1
Paper jams in tray2
Paper jams in MP tray
Hook of the front open
switch on the front
cover broken
Solution
Replace the paper ejection
roller.
Remove foreign materials.
Correct the surrounding
parts on which the
actuator caught.
Replace the sensor PCB.
Replace the main PCB.
Close the tray1.
Close the tray2.
Instruct the user to load
the recording
Replace the registration
sensor.
Replace the paper tray.
Remove the objects from
the paper tray.
Replace the paper pick up
roller.
Replace the paper feed
motor ASSY.
Replace the main PCB.
Pull the jammed paper out
of the indicated area.
Pull the jammed paper out
of the indicated area.
Pull the jammed paper out
of the indicated area.
Replace the front cover
switch.
Confidential