Operation Check Of Lcd (Function Code 12) - Brother DPC-8060 Service Manual

8.4.7 Operation Check of LCD (Function code 12)

Function
This function allows you to check whether the LCD on the control panel works normally.
Operating Procedure
(1) Press the [1] and [2] keys in this order in the initial stage of the maintenance mode.
The LCD shows.
(2) Press the [Start] key. Each time you press the [Start] key, the LCD cycles through the
displays shown at right. The Status lamp also changes from orange, red, to green each
time you press the [Start] key.
(3) Press the [Stop/Exit] key in any process of the above display cycle. The machine beeps
for one second and returns to the initial stage of the maintenance mode.
Backlight on
Backlight on
Backlight off
Backlight off
Fig. 8-6
8-14 Confidential