5.1.81 Joint Cover ASSY
(1) Disconnect the connector of the Battery.
(2) Remove the Battery. (for the model supporting the Battery only)
(3) Disconnect the connector of the Battery harness, and then remove the Battery harness from
the Main PCB.
Battery harness
Main PCB
(4) Remove the four bind B M4x12 Taptite screws from the Joint cover.
(5) Release all Hooks of the Joint cover and lift up the front side of the Joint cover.
(6) Pull out the Joint cover to the front side.
Hooks
Hook
Taptite, bind B M4x12
Battery
2
1
3
<Left side>
6
Hook
Hook
Main PCB
Fig. 5-152
5
Fig. 5-153
5-101
Joint cover
Taptite, bind B M4x12
Hook
Hook
Taptite, bind B M4x12
<Front side>
Confidential