Rom Cover And Battery Assy - Brother FAX218 Service Manual

1.2

ROM Cover and Battery ASSY*

(1) Insert the tip of the spring hook at the center or left half of the locking arm as shown
below, then lift up the hook to release and move the ROM cover to the right.
(2) For the FAX335MC/FAX228MC: Slightly lift up the ROM cover and disconnect
the battery harness from the main PCB, then take out the ROM cover together with
the battery ASSY.
(3) For the FAX335MC/FAX228MC: Remove the battery ASSY from the ROM cover.
Spring hook
ROM cover
(Hook this area.)
ROM cover
Locking arm
P1
SW3 SW2
P8
P7
P6
PH1
Main PCB
PH2
Main PCB
(FAX335MC/FAX228MC)
IV – 6
P3
P9 P10
P13 P12 P11
P4
SW1
P5
(*FAX335MC/FAX228MC)
Battery ASSY*
Battery harness*
Battery connector