Honeywell BENDIX/KING KLN 94 Pilot's Manual page 55

KLN 94 Pilot's Guide
Chapter Name/
Page # Range Page Type
APT 1-8* Airport
VOR 1-2 VOR
NDB 1 NDB
INT 1-2 Intersections
USR 0-3 User Waypoint
ACT ** Active Waypoints
NAV 1-4 Navigation
FPL 0-25 Flight Plan
SET 1-14 Setup
AUX 1-14*** Auxiliary
* KLN 94's which are not approved for IFR have 6 airport pages.
** Varies with the type of waypoints in the active flight plan.
*** Up to 21 with fuel management system and air data interfaces.
The ten page types are listed across the page bar at the bottom of the
screen. Remember that the page type/number of the page actually select-
ed is shown in reverse video (white characters on a blue background).
The page bar works kind of like a map to get you from one page type to
another. To change page types turn the right outer knob either direction.
The area of reverse video moves across the page bar so that it is always
over one of them. For example, let's
say you were on a NAV page (figure
3-33) and you wanted to select a
SET page. You would look at the
page bar and see that the SET
pages are two places to the right of
the NAV pages. Therefore, turning
the right outer knob two clicks clock-
wise will get you to the SET pages
(figure 3-34). The page type selec-
tion wraps around from Auxiliary
(AUX) to Airport (APT); that is, the
knob has no mechanical stops.
Once you have selected the desired page type using the right outer knob,
you may select the page number by rotating the right inner knob. So to
change from the SET 1 page to the SET 4 page turn the right inner knob
clockwise three clicks.
Let's use an example to make sure you understand. You are presently
viewing the APT 2 page and you wish to view the NAV 3 page. Rotating
the right outer knob six clicks clockwise will display the NAV page that you
Chapter 3 Basic GPS Operation
Page Functions
Directory of published airports
Directory of published VOR stations
Directory of published non-directional beacons (NDB)
Directory of published named intersections
Directory of user-defined waypoints
Information about the active flight plan waypoints
Navigation data
Active and stored flight plans
Setting initial position and date/time, updating the data
base, and selecting certain features
Status reports, distance, bearing, time and fuel
calculator; air data calculations based on pilot-entered
inputs and deleting user wpts and remarks
3-13
Figure 3-33
Figure 3-34