Basic Operation Of Panel Controls; Page Selection - Honeywell BENDIX/KING KLN 94 Pilot's Manual

Honeywell gps receiver user manual
Hide thumbs Also See for BENDIX/KING KLN 94:
Table of Contents

Advertisement

Chapter 3 Basic GPS Operation

3.4. BASIC OPERATION OF PANEL CONTROLS

Remember that figure 3-1 is a fold-out page that you may want to refer to
as you read this chapter.
The KLN 94 has three knobs and eleven buttons which are used to per-
form all operations. Most of the page selection and data entry is done
with the knobs on the right side of the front panel and the cursor (B) but-
ton immediately above them.
The cursor position is indicated by an area of reverse video. For exam-
ple, if the characters are normally green on a black background, the
characters change to black on a green background when the cursor is on.
In figure 3-32 the cursor is over
3000. Many pages allow you to
add, delete, or change data on the
screen by first pressing the B but-
ton to turn the cursor function on
and bring the cursor on the screen.
Figure 3-32
The right knobs are then used to
enter or change data. When the cursor is turned on, the page bar
changes to only show the actual page being displayed in the middle with
*CRSR * on either side. In some cases the cursor will flash to indicate
that the F button must be pressed to approve the data.

3.4.1. PAGE SELECTION

It is now time to learn to select a desired page.
NOTE: The cursor function is not used in selecting pages and the B but-
ton should not be pressed at this time. If CRSR is annunciated in page
bar, press the B button to turn the cursor function off.
The right outer knob is rotated to select one of ten page types for the dis-
play. These ten page types are the following:
3-12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents