Honeywell BENDIX/KING KLN 94 Pilot's Manual page 67

Honeywell gps receiver user manual
Hide thumbs Also See for BENDIX/KING KLN 94:
Table of Contents

Advertisement

KLN 94 Pilot's Guide
To select a VOR or NDB by navaid name:
1. With the cursor off, use the right
knobs to select the VOR 1 page
(figure 3-73). The VOR waypoint
in view is not important.
2. Press B and then make sure
the right inner knob is pushed to
the "in" position.
3. With the right outer knob, move
the cursor over the first charac-
ter in the VOR name which is
being displayed (figure 3-74).
4. Change this first character to an
"N" in this case (figure 3-75).
5. Move the cursor one space to
the right and select the second
character, "A" (figure 3-76).
6. Select the third character, "P"
(figure 3-77). Up pops Napoleon
and its identifier, ANX!
7. Turn off the cursor (B) so you
can view other pages.
We will now use another example to
show how we may enter a few char-
acters and then scan through all the
waypoints in the database beginning
with those characters. Let's use this
method to find Newport News airport
in Newport News, VA.
To select an airport by scanning the airport name:
1. With the cursor off and the right inner knob in the "in" position, select
the APT (Airport) 1 page. The airport displayed at this time is not
important.
2. Turn on the cursor (B).
3. Move the cursor over the first
character in the airport name
(figure 3-78).
4. Change the first character to an "N".
Chapter 3 Basic GPS Operation
Figure 3-73
Figure 3-74
Figure 3-75
Figure 3-76
Figure 3-77
Figure 3-78
3-25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents