Viewing And Setting The Date And Timepage - Honeywell BENDIX/KING KLN 94 Pilot's Manual

KLN 94 Pilot's Guide
SAT Static air temperature (the actual temperature of the
surrounding air mass).
TAT Total air temperature (the air temperature including heat rise
due to compressibility. This is the temperature measured
directly by the outside air temperature (OAT) probe.
Prs Pressure altitude (to nearest 100 feet or 10 meters).
Den Density altitude (to nearest 100 feet 10 meters).
5.15 VIEWING AND SETTING THE DATE AND TIME PAGE
The KLN 94 system time and date should seldom, if ever, require updating
because they are automatically updated when at least one satellite is
received. In addition, the KLN 94 contains an internal battery powered
calendar/clock to keep system time and date when the unit is not being
used. You will normally check to make sure the KLN 94 is set to the cor-
rect time and date shortly after you turn the unit on while you verify the
Initialization Page. You can, however, also check the time and date on the
Setup 2 (SET 2) page anytime you desire. There are several pages as
well as some internal functions of the KLN 94, such as magnetic variation
and proper use of database information, that depend on having the proper
time and date.
NOTE: You will not be able to update the time or date if the KLN 94 is
receiving a time and date from a satellite.
To set the date on the SET 2 page:
1. Select the SET 2 page (figure 5-
105).
2. Turn on the cursor. The cursor
will be over the entire date field
(figure 5-106).
3. Select the correct day of the
month with the right inner knob.
4. Move the flashing part of the cur-
sor to the month field (middle
three dashes) with the right outer
knob, and select the proper
month (figure 5-107).
Chapter 5 Intermediate Operation
Figure 5-105
Figure 5-106
Figure 5-107
5-39