Honeywell BENDIX/KING KLN 94 Pilot's Manual page 141

Honeywell gps receiver user manual
Hide thumbs Also See for BENDIX/KING KLN 94:
Table of Contents

Advertisement

KLN 94 Pilot's Guide
NOTE: The altitude alerting function of the KLN 94 does not meet FAR
Part 91 for turbojet-powered civil airplanes.
NOTE: Before you use the altitude alerting function, it is a good idea to
make sure that the KLN 94 baro setting is current. To do this, press the
A button and use the right inner knob to modify the baro setting.
To Use Altitude Alerting:
1. Select the Setup 13 (SET 13)
page and turn on the cursor
(B ). It will come on over the
Alert: field. If OFF is displayed,
turn the right inner knob to select
ON (figure 5-13).
2. Select a warn altitude deviation
by positioning the cursor over
the Warn: field. Use the right
inner knob to select the desired
value (figure 5-14). It is selec-
table in one hundred foot
increments from 200 feet up to
900 feet or in ten meter increments from 60 meters to 270 meters.
Normally, you will use the same value all the time so you only have to
enter this the first time you use altitude alerting. The recommended
warn altitude deviation is 300 feet or 100 meters.
3. If necessary, adjust the altitude
alert audio volume by moving
the cursor to the Volume: field.
Use the left inner knob to select
a desired volume between 00
and 99. The larger the number,
the louder the volume (figure 5-15).
4. Press A . The Altitude 1 (ALT 1) page will be displayed with the cur-
sor over the altimeter baro set field.
NOTE: The altimeter baro set units may be changed between inches, mil-
libars and hectopascals on the SET 12 page).
5. Use the right inner knob to
update the altimeter baro setting
if required (figure 5-16).
Chapter 5 Intermediate Operation
Figure 5-13
Figure 5-14
Figure 5-15
Figure 5-16
5-7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents