Honeywell BENDIX/KING KLN 94 Pilot's Manual page 47

KLN 94 Pilot's Guide
The KLN 94 is capable of displaying the following time zones:
UTC
GST
GDT
ATS
ATD
EST
EDT
CST
CDT
MST
MDT
PST
PDT
AKS
AKD
HAS
HAD
SST
SDT
LCL
You will be able to change the time zone any time you desire on sev-
eral other pages, so don't worry if you're not sure which time zone to
choose. UTC—Coordinated Universal Time (also called "Zulu") is
always a safe choice.
The local time zone (LCL) is selected on the SET 2 page, and is
defined to be a certain time offset from Zulu (UTC).
Once you have selected the desired time zone, position the cursor
over the entire time field and select the correct hour with the right
inner knob (figure 3-13). Since
24 hour time is used, be sure to
add 12 if the time is after 1:00
P.M. (2:30 P.M. becomes 1430).
Now move the cursor to the tens
of minutes position and select
the desired value, and repeat
Coordinated Universal Time (Zulu)
Greenland Standard Time (UTC - 3)
Greenland Daylight Time (UTC - 2)
Atlantic Standard Time (UTC - 4)
Atlantic Daylight Time (UTC - 3)
Eastern Standard Time (UTC - 5)
Eastern Daylight Time (UTC - 4)
Central Standard Time (UTC - 6)
Central Daylight Time (UTC - 5)
Mountain Standard Time (UTC - 7)
Mountain Daylight Time (UTC - 6)
Pacific Standard Time (UTC - 8)
Pacific Daylight Time (UTC - 7)
Alaska Standard Time (UTC - 9)
Alaska Daylight Time (UTC - 8)
Hawaii Standard Time (UTC - 10)
Hawaii Daylight Time (UTC - 9)
Samoa Standard Time (UTC - 11)
Samoa Daylight Time (UTC - 10)
Local Time Zone (user-defined)
Chapter 3 Basic GPS Operation
Figure 3-13
3-5