Deleting Flight Plans; Storing Fpl 0 As A Numbered Flight Plan - Honeywell BENDIX/KING KLN 94 Pilot's Manual

Honeywell gps receiver user manual
Hide thumbs Also See for BENDIX/KING KLN 94:
Table of Contents

Advertisement

KLN 94 Pilot's Guide
4. Press F and the waypoint will
be deleted from the flight plan.
The other waypoints in the flight
plan will be correctly reposi-
tioned (figure 4-21).
5. Turn off the cursor with the B
button.
4.1.6.

DELETING FLIGHT PLANS

To delete a flight plan which is no longer required:
1. Display the flight plan (FPL 0,
FPL 1, . . ., or FPL 25) which is
to be cleared (figure 4-22).
2. Make sure that the cursor is
turned off, and use the B but-
ton if it is not.
3. Press E. The words Delete
FPL? will appear at the top of
the page (figure 4-23). If a mis-
take was made and you do not
wish to clear this flight plan,
press E again.
4. Press F to clear the flight
plan. The flight plan page will
appear as in figure 4-24.
4.1.7.

STORING FPL 0 AS A NUMBERED FLIGHT PLAN

The active flight plan may be loaded into a numbered flight plan so that it
can be recalled for later use. This may be desirable, for example, if the
active flight plan was originally created on the FPL 0 page and not as a
numbered flight plan.
To store the active flight plan as a numbered flight plan:
1. Select a numbered flight plan page which does not contain any way-
points (figure 4-24). If none exist, use the procedure described in
section 4.1.6, "Deleting Flight Plans," to clear a flight plan which is no
longer required.
Chapter 4 Flight Plan Operation
Figure 4-21
Figure 4-22
Figure 4-23
Figure 4-24
4-7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents