Expansion Board-Related Port 85 Codes; Miscellaneous Port 85 Codes - HP ProLiant DL585 Generation 2 Maintenance And Service Manual

Hard drives
o
Peripheral devices
o
Reseat the remaining memory boards, rebooting after each installation to isolate any failed memory
3.
boards, if applicable.
Replace the DIMMs with a remaining bank of memory.
4.
Replace the memory board, if applicable.
5.
Replace the system board.
6.
IMPORTANT:
serial number through RBSU
58).

Expansion board-related port 85 codes

Expansion board-related port 85 codes display in the format 6xh.
IMPORTANT:
continues, proceed with the next step.
To troubleshoot expansion board-related error codes:
Reseat all expansion boards.
1.
Bring the server to base configuration by removing all components that are not required by the
2.
server to complete POST. This process can include removing all:
Expansion boards (on page 48)
o
Processors (on page 36), except the processor installed in socket 1
o
IMPORTANT:
does not function properly.
PPMs ("PPM" on page 41), except the PPM installed in slot 1
o
DIMMs (on page 42), except the first bank
o
Hard drives
o
Peripheral devices
o
Install the expansion boards one at a time, rebooting between each installation to isolate the failed
3.
expansion board.
Replace the failed expansion board, if applicable.
4.
Replace the PCI riser board, if applicable.
5.
Replace the system board.
6.
IMPORTANT:
serial number through RBSU
58).

Miscellaneous port 85 codes

To troubleshoot all other port 85 codes:
("SAS or SATA hard drives" on page 44)
If replacing the system board or clearing NVRAM, you must re-enter the server
("Re-entering the server serial number and product
Reboot the server after completing each numbered step. If the error condition
Processor socket 1 and PPM slot 1 must be populated at all times or the server
("SAS or SATA hard drives" on page 44)
If replacing the system board or clearing NVRAM, you must re-enter the server
("Re-entering the server serial number and product
ID" on page
ID" on page
Diagnostic tools 66