Usb Cable Assembly - HP ProLiant DL585 Generation 2 Maintenance And Service Manual

Press the tab and pull the bezel away from the server.
2.
To replace the component, reverse the removal procedure.

USB cable assembly

Power down the server (on page 26).
1.
Remove the processor memory module
2.
Extend or remove the server from the rack
3.
"Remove the server from the
Remove the access panel
4.
Remove the power button assembly bezel (on page 31).
5.
Disconnect the USB cable from the media board
6.
Remove the screws securing the USB cable assembly and remove the cable from the server.
7.
("Removing the processor memory
("Extending the server from the
rack" on page 28).
("Removing the access panel" on page 28).
("Front panel cable
module" on page 29).
rack" on page 27,
components" on page 83).
Removal and replacement procedures 32