Video Cable Assembly - HP ProLiant DL585 Generation 2 Maintenance And Service Manual

To replace the component, reverse the removal procedure.

Video cable assembly

Power down the server (on page 26).
1.
Remove the processor memory module
2.
Extend or remove the server from the rack
3.
"Remove the server from the
Remove the access panel
4.
Remove the power button assembly bezel (on page 31).
5.
Disconnect the video cable from the media board
6.
Remove the screws securing the cable bracket to the server and remove the bracket.
7.
Remove the screws securing the video cable to the bracket and remove the cable.
8.
To replace the component, reverse the removal procedure.
("Removing the processor memory
("Extending the server from the
rack" on page 28).
("Removing the access panel" on page 28).
module" on page 29).
rack" on page 27,
("Front panel cable components" on page 83).
Removal and replacement procedures 33