Press the tabs behind the bezel and pull the bezel away from the server. If necessary, use a flathead
3.
screwdriver to press the tabs.
To replace the component, reverse the removal procedure.
Processor memory module bezel
Power down the server (on page 26).
1.
Remove the processor memory module, and open the cover
2.
module" on page 29).
Press the tabs to disconnect the bottom of the bezel and pull the bezel away from the server. If
3.
necessary, use a flathead screwdriver to press the tabs.
To replace the component, reverse the removal procedure.
("Removing the processor memory
Removal and replacement procedures 35