Processors
CAUTION:
electrostatic discharge
CAUTION:
will not function properly.
To replace a processor:
Power down the server (on page 26).
1.
WARNING:
processor memory module; when fully populated, it can weigh up to 13.6 kg (30 lb).
Remove the processor memory module, and open the cover
2.
module" on page 29).
WARNING:
before touching it.
Open the heatsink retaining bracket.
3.
Before starting this procedure, read the information about protecting against
("Preventing electrostatic
Processor and PPM sockets 1 and 2 must be populated at all times or the server
Use caution when installing the processor memory module or removing the
To reduce the risk of personal injury from hot surfaces, allow the heatsink to cool
discharge" on page 25).
("Removing the processor memory
Removal and replacement procedures 36