Table of Contents
Advertisement
Receiver
the Rx receiver rear panel, (see figure 4), has a Dc power input and twisted pair link
connection and also has four USB hub type A female connectors.
POWER
12V
1.0A MAX.
d
Figure 4.
d
Power Input Connector — the receiver requires an external supply. Plug the included
12 VDc power supply into this 2-pole, 3.5 mm captive screw connector.
e
Link (twisted pair) connector — connect the tP cable from the transmitter link
connector (figure 3, item
CAUtION: Do not connect this port to a computer data or telecommunications
f
USB hub connectors — the built-in four port hub uses four USB type A female
connectors. the connections are USB 2.0 compatible providing +5 VDc at up to 500 mA
to connected USB peripherals requiring power.
HUB
1
3
DO NOT
2
4
CONNECT
TO LAN
LINK
e
f
USB Extender Rx Rear Panel Connectors
c
) to this RJ-45 female connector.
network.
USB Extenders • Installation and Operation
8
Advertisement
Table of Contents
