Table of Contents
Advertisement
Bracket
Brace
Back
Plate
U-Bolt
Figure 17.
Projector Pole Inside the Mount Kit
4.
Place the contoured bracket brace between the pole and the back plate. the pole
should fit snugly into the depression in the center of the bracket brace.
5.
Place the U-bolt around the ceiling pole. Insert the two legs of the U-bolt through the
round holes on the contoured bracket brace and then through the slotted holes on the
back plate.
NOtE: the supplied U-bolt fits a typical (1.5 inch to 2.0 inch diameter) ceiling
pole.
6.
Secure the bracket to the U-bolt with the included hex nuts, washers, and lock washers.
Finger tighten the hex nuts.
7.
Adjust the position of the kit on the pole then tighten the hex nuts with a wrench.
Extron
PMK 300
Multi-product Pole
Mount Kit
USB Extenders • Reference Information
24
Advertisement
Table of Contents
