Table of Contents
Advertisement
For optional rack mounting, mount the transmitter or receiver on any of the
following rack shelves:
•
RSF 123, Rack Shelf Kit for 3.5 inch deep products (part #60-190-20) (figure 13)
•
RSB 123 , Basic Rack Shelf for 3.5 inch deep products (part #60-604-20)
•
RSU 126, Universal Rack Shelf for 6 inch deep products (part #60-190-10)
•
RSB 126, Basic Rack Shelf for 6 inch deep products
(part #60-604-10)
•
RSU 129, Universal Rack Shelf for 9.5 inch deep products (part #60-190-01)
•
RSB 129, Basic Rack Shelf for 9.5 inch deep products,
gray (part #60-604-02)
the transmitter or receiver unit can be mounted in the front or the rear of the rack.
1inchQuarterRackVersaToolsShelf
1.
If installed, remove the feet from the bottom of the transmitter or receiver unit.
2.
Mount the transmitter or receiver unit using two 4-40 x 3/16 inch screws in opposite
(diagonal) corners to secure the transmitter or receiver to the shelf.
3.
Install false faceplates or other units to the rack shelf.
3.5" Deep Rack Shelf
1/4 Rack Width Front
False Faceplate
Use 2 mounting holes on
opposite corners.
Figure 13.
Mounting the Transmitter or Receiver Unit On a Rack Shelf
(2) 4-40 x 3/16"
Screws
USB Extenders • Reference Information
20
Advertisement
Table of Contents
