System Operation - Extron electronics TP Series User Manual

Twisted pair transmitter and receiver
Hide thumbs Also See for TP Series:
Table of Contents

Advertisement

If a host PC or laptop powers the transmitter:
PC
USB
Transmitter
HOST
POWER
12V
0.4A MAX.
DO NOT
CONNECT
TO LAN
USB host providing power.
Figure 8.
1.
2.
3.
4.
5.

System Operation

No drivers are required for a host to function with the USB Extenders. the USB Extender will
be detected by Windows and appropriate USB drivers loaded. certain USB peripherals, such
as gaming keyboards, USB interactive whiteboards, scanners, printers, and similar devices,
require a Pc to have the appropriate drivers installed. Refer to the USB device's installation
instructions or the peripheral manufacturer's website for drivers.
UTP or STP CAT5 or better cable.
Terminate both ends identically, in accordance with
either the TIA/EIA T 568A or the TIA/EIA T 568B
wiring standard.
LINK
USB Extender Connection guide with Host Supply
connect twisted pair cable between the USB Extender transmitter and receiver..
connect the included power supply to the USB Extender receiver and apply power. the
power LED on the receiver lights.
NOtE: the transmitter power LED and both link LEDs remain dark.
connect a type A-B USB cable from the USB host to the USB Extender transmitter.
Apply power to the USB host and boot it up. the power LED on the transmitter and the
link LEDs on both transmitter and receiver light.
Once the host has booted, the transmitter host LED blinks to indicate communications
between the host and transmitter. Shortly after, the host LED on the receiver blinks to
indicate the host is communicating with the hub controller (USB Extender receiver).
connect USB peripherals (keyboard, mouse, scanner, etc.) to the receiver. As each
peripheral is recognized by the host, the respective USB hub port LED lights.
Keyboard
Receiver
POWER
12V
1.0A MAX.
1
DO NOT
2
CONNECT
TO LAN
LINK
Four USB 2.0 compatible type A
female connectors provide +5 VDC
at up to 500 mA to connected USB
peripherals.
Ground
+12 VDC
USB Extenders • Installation and Operation
USB
HUB
3
4
External
Power Supply
(12 VDC, 1 A )
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Usb extender txUsb extender rx

Table of Contents