Table of Contents
Advertisement
Mounting Options
Mounting instructions are included in
reference section. Mounting instructions are also included with each optional mounting kit.
CAUtION:
the three inch deep, one inch high, quarter rack width USB Extender transmitters and
receivers can be placed on a tabletop, mounted on a rack shelf, or mounted under a desk or
tabletop. the receiver can be mounted on a projector bracket.
tabletop Placement
Affix the four included rubber feet to the bottom of the unit and place it in any convenient
location.
Rack Mounting
For UL guidelines and optional rack mounting equipment, see
Under-Furniture Mounting
the unit can be mounted under a horizontal surface using an optional MBU 123,
under-desk mount Kit for 1/8 and 1/4 Rack Width products, (part #70-212-01).
through-Furniture Mounting
the transmitter or receiver can be mounted through a desk or other furniture using an
optional MBD 129, through-desk mounting kit for quarter or half rack width products, part
#70-077-02.
Projector Mounting
the receiver can be mounted on a projector bracket using either of the following optional
projector mounting kits:
•
•
Installation and service must be performed by authorized personnel
only.
PMK 300 multi-product pole mount kit (part #70-374-01)
PMK 350 low profile, multi-product pole mount kit (part #70-563-03)
Mounting the USB Extender on page 19
Rack Mounting on page
USB Extenders • Installation and Operation
in the
19.
6
Advertisement
Table of Contents
