Show Mls Qos Interface - Cisco Catalyst 3750 Command Reference Manual

show mls qos interface

show mls qos interface
Use the show mls qos interface user EXEC command to display quality of service (QoS) information
at the port level.
Syntax Description interface-id
buffers
queueing
statistics
| begin
| exclude
| include
expression
Though visible in the command-line help string, the policers keyword is not supported.
Note
Command Modes
User EXEC
Command History Release
12.1(11)AX
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show mls qos interface interface-id command:
Switch# show mls qos interface gigabitethernet1/0/2
GigabitEthernet1/0/2
Attached policy-map for Ingress: videowizard_policy
trust state: not trusted
COS override: dis
default COS: 0
DSCP Mutation Map: Default DSCP Mutation Map
Catalyst 3750 Switch Command Reference
2-342
show mls qos interface [interface-id] [buffers | queueing | statistics]
[ | {begin | exclude | include} expression]
(Optional) Display QoS information for the specified port. Valid interfaces
include physical ports.
(Optional) Display the buffer allocation among the queues.
(Optional) Display the queueing strategy (shared or shaped) and the weights
corresponding to the queues.
(Optional) Display statistics for sent and received Differentiated Services Code
Points (DSCPs) and class of service (CoS) values, the number of packets
enqueued or dropped per egress queue, and the number of in-profile and
out-of-profile packets for each policer.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
78-16181-01