errdisable detect cause
Examples
This example shows how to enable error disable detection for the link-flap error-disable cause:
Switch(config)# errdisable detect cause link-flap
You can verify your setting by entering the show errdisable detect privileged EXEC command.
Related Commands
Command
show errdisable detect
show interfaces
Catalyst 3750 Switch Command Reference
2-88
Description
Displays errdisable detection information.
status err-disabled
Displays interface status or a list of interfaces in the
error-disabled state.
Chapter 2
Catalyst 3750 Switch Cisco IOS Commands
78-16181-01