Cisco Catalyst 3750 Command Reference Manual page 193

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
Examples
This example shows how to map a port to queue-set 2. It allocates 40 percent of the buffer space to egress
queue 1 and 20 percent to egress queues 2, 3, and 4:
Switch(config)# mls qos queue-set output 2 buffers 40 20 20 20
Switch(config)# interface gigabitethernet2/0/1
Switch(config-if)# queue-set 2
You can verify your settings by entering the show mls qos interface [interface-id] buffers or the show
mls qos queue-set privileged EXEC command.
Related Commands Command
mls qos queue-set output threshold
queue-set
show mls qos interface
show mls qos queue-set
78-16181-01
Description
Configures the weighted tail-drop (WTD) thresholds,
guarantees the availability of buffers, and configures the
maximum memory allocation to a queue-set.
Maps a port to a queue-set.
buffers Displays quality of service (QoS) information.
Displays egress queue settings for the queue-set.
mls qos queue-set output buffers
Catalyst 3750 Switch Command Reference
2-167