Show Mls Qos Interface - Cisco Catalyst Blade Switch 3130 Reference Manual
For dell command reference
Hide thumbs
Also See for Catalyst Blade Switch 3130:
- Software configuration manual (1354 pages) ,
- Hardware installation manual (84 pages) ,
- Manual (42 pages)
Table of Contents
Advertisement
Chapter 2 Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
show mls qos interface
Use the show mls qos interface user EXEC command to display quality of service (QoS) information
at the port level.
Syntax Description
interface-id
buffers
queueing
statistics
| begin
| exclude
| include
expression
Note
Though visible in the command-line help string, the policers keyword is not supported.
Command Modes
User EXEC
Command History
Release
12.2(40)EX1
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show mls qos interface interface-id command when VLAN-based
QoS is enabled:
Switch> show mls qos interface gigabitethernet1/0/1
GigabitEthernet1/0/1
trust state:not trusted
trust mode:not trusted
trust enabled flag:ena
COS override:dis
default COS:0
OL-13271-01
show mls qos interface [interface-id] [buffers | queueing | statistics]
[ | {begin | exclude | include} expression]
(Optional) Display QoS information for the specified port. Valid interfaces
include physical ports.
(Optional) Display the buffer allocation among the queues.
(Optional) Display the queueing strategy (shared or shaped) and the weights
corresponding to the queues.
(Optional) Display statistics for sent and received Differentiated Services Code
Points (DSCPs) and class of service (CoS) values, the number of packets
enqueued or dropped per egress queue, and the number of in-profile and
out-of-profile packets for each policer.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Cisco Catalyst Blade Switch 3130 for Dell Command Reference
show mls qos interface
2-545
Advertisement
Table of Contents
