Show Ip Dhcp Snooping - Cisco Catalyst 3750 Command Reference Manual

show ip dhcp snooping

show ip dhcp snooping
Use the show ip dhcp snooping user EXEC command to display the Dynamic Host Configuration
Protocol (DHCP) snooping configuration.
Syntax Description This command has no arguments or keywords.
Command Modes
User EXEC
Command History Release
12.1(19)EA1
Examples
This is an example of output from the show ip dhcp snooping command.
Switch> show ip dhcp snooping
Switch DHCP snooping is enabled
DHCP snooping is configured on following VLANs:
40-42
Insertion of option 82 is enabled
Verification of hwaddr field is enabled
Interface
------------------------
GigabitEthernet1/0/1
GigabitEthernet1/0/2
GigabitEthernet2/0/3
GigabitEthernet2/0/4
Related Commands Command
show ip dhcp snooping
binding
Catalyst 3750 Switch Command Reference
2-298
show ip dhcp snooping
Modification
This command was introduced.
Description
Displays the DHCP snooping binding information.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
Trusted Rate limit (pps)
------- ----------------
yes unlimited
yes unlimited
no 2000
yes unlimited
78-16181-01