Cisco Catalyst 3750 Command Reference Manual page 388

show parser macro
This is an example of output from the show parser macro name command:
Switch# show parser macro name standard-switch10
Macro name : standard-switch10
Macro type : customizable
macro description standard-switch10
# Trust QoS settings on VOIP packets
auto qos voip trust
# Allow port channels to be automatically formed
channel-protocol pagp
This is an example of output from the show parser brief command:
Switch# show parser macro brief
This is an example of output from the show parser description command:
Switch# show parser macro description
Interface
--------------------------------------------------------------
Gi1/0/1
Gi1/0/2
--------------------------------------------------------------
This is an example of output from the show parser description interface command:
Switch# show parser macro description interface gigabitethernet1/0/2
Interface
--------------------------------------------------------------
Gi1/0/2
--------------------------------------------------------------
Related Commands Command
macro apply
macro description
macro name
Catalyst 3750 Switch Command Reference
2-362
standard-switch10
testm
Macro Description
standard-switch10
this is test macro
Macro Description
this is test macro
Description
Applies a macro on an interface or applies and traces a macro on an interface.
Adds a description about the macros that are applied to an interface.
Creates a macro.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
78-16181-01