Macro Description - Cisco Catalyst 3750 Command Reference Manual

macro description

macro description
Use the macro description interface configuration command on the switch stack or on a standalone
switch to enter a description about which macros are applied to an interface. Use the no form of this
command to remove the description.
Syntax Description
description text
Defaults This command has no default setting.
Command Modes Interface configuration
Command History Release
12.1(19)EA1
Usage Guidelines
Use the description keyword to associate comment text, or the macro name, with an interface. When
multiple macros are applied on a single interface, the description text will be from the last applied macro.
This example shows how to add a description to an interface:
Switch(config-if)# macro description duplex settings
You can verify your settings by entering the show parser macro description privileged EXEC
command.
Related Commands Command
show parser macro
show running-config
Catalyst 3750 Switch Command Reference
2-146
macro description text
no macro description text
Enter a description about the macros that are applied to the specified interface.
Modification
This command was introduced.
Description
Displays the macro definition for all macros or for the specified macro.
Displays the configuration information currently running on the switch. For
syntax information, select Cisco IOS Configuration Fundamentals
Command Reference, Release 12.2 > File Management Commands >
Configuration File Management Commands.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
78-16181-01