Cisco Catalyst 3750 Command Reference Manual page 96

dot1x guest-vlan
This example shows how to set 3 as the quiet time on the switch, to set 15 as the number of seconds that
the switch waits for a response to an EAP-request/identity frame from the client before resending the
request, and to enable VLAN 2 as an 802.1x guest VLAN when an 802.1X port is connected to a DHCP
client:
Switch(config-if)# dot1x timeout quiet-period 3
Switch(config-if)# dot1x timeout tx-period 15
Switch(config-if)# dot1x guest-vlan 2
You can verify your settings by entering the show dot1x [interface interface-id] privileged EXEC
command.
Related Commands Command
show dot1x
Catalyst 3750 Switch Command Reference
2-70
[interface interface-id]
Chapter 2
Description
Displays 802.1x status for the specified port.
Catalyst 3750 Switch Cisco IOS Commands
78-16181-01