Archive Upload-Sw - Cisco Catalyst 3750 Command Reference Manual

archive upload-sw

archive upload-sw
Use the archive upload-sw privileged EXEC command on the switch stack or on a standalone switch to
upload an existing switch image to a server.
Syntax Description /source-system-num
stack member number
/version version_string
destination-url
Defaults Uploads the currently running image from the flash: file system.
Command Modes
Privileged EXEC
Command History Release
12.1(11)AX
Catalyst 3750 Switch Command Reference
2-14
archive upload-sw [/source-system-num stack member number | /version version_string]
destination-url
Specify the specific stack member containing the image that is to be
uploaded.
(Optional) Specify the specific version string of the image to be uploaded.
The destination URL alias for a local or network file system. These options
are supported:
•
•
•
•
The image-name.tar is the name of software image to be stored on the
server.
Modification
This command was introduced.
The syntax for the local flash file system on the standalone switch or
the stack master:
flash:
The syntax for the local flash file system on a stack member:
flash member number:
The syntax for the File Transfer Protocol (FTP):
ftp:[[//username[:password]@location]/directory]/image-name.tar
The syntax for the Remote Copy Protocol (RCP):
rcp:[[//username@location]/directory]/image-name.tar
The syntax for the Trivial File Transfer Protocol (TFTP):
tftp:[[//location]/directory]/image-name.tar
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
78-16181-01