Cisco Catalyst 3750 Command Reference Manual page 496

storm-control
Examples
This example shows how to enable multicast storm control on a port with a 75.5 percent threshold level:
Switch(config)# interface gigabitethernet2/0/1
Switch(config-if)# storm-control multicast level 75.5
This example shows how to disable multicast storm control on a port:
Switch(config)# interface gigabitethernet2/0/1
Switch(config-if)# no storm-control multicast level
You can verify your settings by entering the show storm-control privileged EXEC command.
Related Commands Command
show storm-control
Catalyst 3750 Switch Command Reference
2-470
Description
Displays broadcast, multicast, or unicast storm control settings on all
interfaces or on a specified interface.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
78-16181-01