Regular Expressions In Black Or White List Entries - ZyXEL Communications ZyWALL USG 300 User Manual

Chapter 38 Anti-Spam
Table 186 Configuration > Anti-X > Anti-Spam > Black/White List > Black List (or
White List) > Add
LABEL
Sender or Mail
Relay IP
Address
Netmask
Sender E-Mail
Address
Mail Header
Field Name
Field Value
Keyword
OK
Cancel

38.4.2 Regular Expressions in Black or White List Entries

The following applies for a black or white list entry based on an e-mail subject, e-
mail address, or e-mail header value.
• Use a question mark (?) to let a single character vary. For example, use "a?c"
(without the quotation marks) to specify abc, acc and so on.
• You can also use a wildcard (*). For example, if you configure *def.com, any e-
mail address that ends in def.com matches. So "mail.def.com" matches.
• The wildcard can be anywhere in the text string and you can use more than one
wildcard. You cannot use two wildcards side by side, there must be other
characters between them.
• The ZyWALL checks the first header with the name you specified in the entry. So
if the e-mail has more than one "Received" header, the ZyWALL checks the first
one.
692
DESCRIPTION
This field displays when you select the IP type. Enter an IP address in
dotted decimal notation.
This field displays when you select the IP type. Enter the subnet mask
here, if applicable.
This field displays when you select the E-Mail type. Enter a keyword (up
to 63 ASCII characters). See
details.
This field displays when you select the Mail Header type.
Type the name part of an e-mail header (the part that comes before the
colon). Use up to 63 ASCII characters.
For example, if you want the entry to check the "R eceived:" header for a
specific mail server's domain, enter "Received" here.
This field displays when you select the Mail Header type.
Type the value part of an e-mail header (the part that comes after the
colon). Use up to 63 ASCII characters.
For example, if you want the entry to check the "R eceived:" header for a
specific mail server's domain, enter the mail server's domain here.
See Section 38.4.2 on page 692
Click OK to save your changes.
Click Cancel to exit this screen without saving your changes.
Section 38.4.2 on page 692
for more details.
ZyWALL USG 300 User's Guide
for more