ZyXEL Communications ZyWALL USG 300 User Manual page 989

Unified security gateway
Hide thumbs Also See for ZyWALL USG 300:
Table of Contents

Advertisement

Table 297 System Logs (continued)
LOG MESSAGE
Update the profile %s
has failed because
Custom IP was empty.
Update the profile %s
has failed because WAN
interface was empty.
The profile %s has
been paused because
the VRRP status of WAN
interface was standby.
Update the profile %s
has failed because WAN
interface was link-
down.
Update the profile %s
has failed because WAN
interface was not
connected.
Update the profile %s
has failed because IP
address of WAN
interface was empty.
Update the profile %s
has failed because
ping-check of WAN
interface has failed.
The profile %s has
been paused because
the HA interface of
VRRP status was
standby.
Update the profile %s
has failed because HA
interface was link-
down.
Update the profile %s
has failed because the
HA interface was not
connected.
Update the profile %s
has failed because IP
address of HA
interface was empty.
Update the profile %s
has failed because
ping-check of HA
interface has failed.
DDNS has been disabled
by Device-HA.
ZyWALL USG 300 User's Guide
DESCRIPTION
The DDNS profile's IP select type is custom, and a custom IP
was not defined, %s is the profile name.
If the DDNS profile's IP select type is iface, it needs a WAN
iface, %s is the profile name.
The profile is paused by device-HA, because the VRRP status
of that iface is standby, %s is the profile name.
DDNS profile cannot be updated for WAN IP because WAN
iface is link-down, %s is the profile name.
DDNS profile cannot be updated for WAN IP because WAN
iface is PPP and not connected, %s is the profile name.
DDNS profile cannot be updated because the IP of WAN iface
is 0.0.0.0, 1st %s is the profile name.
DDNS profile cannot be updated because the ping-check for
WAN iface failed , %s is the profile name.
The profile is paused by Device-HA, because the VRRP status
of that HA iface is standby, %s is the profile name.
DDNS profile cannot be updated for HA IP address because
HA iface is link-down, %s is the profile name.
DDNS profile cannot be updated for HA IP address because
HA iface is PPP and not connected, %s is the profile name.
DDNS profile cannot be updated because the IP address of HA
iface is 0.0.0.0, %s is the profile name.
DDNS profile cannot be updated because the fail of ping-
check for HA iface, %s is the profile name
DDNS is disabled by Device-HA, because all VRRP groups are
standby.
Appendix A Log Descriptions
989

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Usg 100 seriesUsg 200 series

Table of Contents