ZyXEL Communications ZyWALL USG 300 User Manual page 805

Note: You must also configure the shared folder on the file server for remote access.
Refer to the document that comes with your file server.
Figure 531 Configuration > Object > SSL Application > Add/Edit: File Sharing
The following table describes the labels in this screen.
Table 231 Configuration > Object > SSL Application > Add/Edit: File Sharing
LABEL
Create new
Object
Object
Type
File Sharing
Name
Shared Path
Preview
Ok
Cancel
ZyWALL USG 300 User's Guide
DESCRIPTION
Use this to configure any new settings objects that you need to use in this
screen.
Select File Sharing to create a file share application for VPN SSL.
Enter a descriptive name to identify this object. You can enter up to 31
characters ("0-9", "a-z", "A-Z", "-" and "_"). Spaces are not allowed.
Specify the IP address, domain name or NetBIOS name (computer name)
of the file server and the name of the share to which you want to allow
user access. Enter the path in one of the following formats.
"\\<IP address>\<share name>"
"\\<domain name>\<share name>"
"\\<computer name>\<share name>"
For example, if you enter "\\my-server\Tmp", this allows remote users to
access all files and/or folders in the "\Tmp" share on the "my-server"
computer.
Click this to access the URL you specified in a new IE web browser.
Click Ok to save the changes and return to the main SSL Application
Configuration screen.
Click Cancel to discard the changes and return to the main SSL
Application Configuration screen.
Chapter 48 SSL Application
805